Standing water in the front or the back yard can be an eyesore for both the homeowner and other people in the neighborhood, but it is not typically something that cannot be remedied. Depending on the source of the problem, it can be solved usually by either installing a drainage system or by the addition of a bit of soil in the right areas.
Allowing standing water in your yard, especially around the foundation of your house, can be detrimental both to the value of the property and to the structural integrity of the home. Water collecting in pockets around the base of the house can seep down into the basement or cause the house to slowly sink into the ground due to soil displacement over time. Wet soil does not form a good foundation for a home, so you need to try and fix this problem as soon as you run across it.
Many times simply piling soil in the areas where the water collects will fix the problem, since it is usually a simple issue of elevation. Some areas of your yard may not be the same elevation as other parts and water collects in these spots. Putting soil in these and planting grass over them not only for a pleasing visual effect, but also to keep the soil well in place, is the only real way to deal with elevation issues.
Putting in a drainage system is also a good option and it is not that expensive to install. You need a shovel, some gravel, PVC pipe, and a sink strainer. You should not have to hire anyone to do this for you, since all it takes is a little common sense and a bit of effort. You do, however, need to make sure that you obtain a permit to install the drain system, depending on where you live. Some areas may require that you get a permit to install a drainage system in your yard and want you to ask permission before directing the water into a city sewer or ditch.
Dig the ditch starting at the part of the yard that you want to drain and dig it to the area you want the water to go to. This ditch should slant downhill so that the water does not simply stand inside the drain and go nowhere. To get an adequate amount of water flow, it should decline 6 inches for every 100 feet. Install the PVC pipe inside it and cover with gravel. Cover that with soil and plant grass over it. This should keep the water drained well, but if you need more than one spot in your yard drained, the construction may be a little more complicated.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
Tuesday, October 2, 2007
Water Damaged Consumer Electronics
Spilling water or any other liquid onto a laptop or a cell phone is one of the last things most owners of these items would like to do, but a lot of times this cannot really be avoided. Whether it is a cup of coffee, soda, or just plain water, most people think that if they spill this onto any electronic item that they own, the item is irreparable. Most assume that the item is completely dead and just needs to be replaced. This is not usually the case, even if the object becomes completely submerged in water.
If the device does not have electricity running to it at the time, even if it is completely submerged in water, it can usually be saved as long as you let it dry completely before you try to use it again. The only real thing that you have to worry about when you submerge something electronic in water while it is on is just how long it stays under the water. Over 20 seconds can usually cause irreparable damage, but as long as you can get the item out in less than this time, it should be able to be repaired.
As soon as the devices comes into contact with water or another liquid while it is turned on, you need to get rid of the power source immediately. If the device is connected to a wall outlet or a car plug, unplug it from the source of the power first and DO NOT reach into the liquid to obtain the item. React quickly, but try to hold onto common sense at the same time. After you do that, dry off the surface with a paper towel and put the item into a bowl of uncooked rice or something else that will draw out the moisture. Leave it in the bowl for a day or two to be sure it is completely dry.
If you have an item that has been submerged in flood water, you might need to consult a professional on this one. Mud, silt, and other particle debris may have gotten inside the system, so even if it dries out completely, more damage can happen if you try to use it. Flood water or not, do not turn the device on before it is completely dry. This is the worst mistake that you could make while it is still wet.
Jim Corkern is a writer and promoter of quality
Water Damage Miami and
water damage restoration in atlanta companies.
If the device does not have electricity running to it at the time, even if it is completely submerged in water, it can usually be saved as long as you let it dry completely before you try to use it again. The only real thing that you have to worry about when you submerge something electronic in water while it is on is just how long it stays under the water. Over 20 seconds can usually cause irreparable damage, but as long as you can get the item out in less than this time, it should be able to be repaired.
As soon as the devices comes into contact with water or another liquid while it is turned on, you need to get rid of the power source immediately. If the device is connected to a wall outlet or a car plug, unplug it from the source of the power first and DO NOT reach into the liquid to obtain the item. React quickly, but try to hold onto common sense at the same time. After you do that, dry off the surface with a paper towel and put the item into a bowl of uncooked rice or something else that will draw out the moisture. Leave it in the bowl for a day or two to be sure it is completely dry.
If you have an item that has been submerged in flood water, you might need to consult a professional on this one. Mud, silt, and other particle debris may have gotten inside the system, so even if it dries out completely, more damage can happen if you try to use it. Flood water or not, do not turn the device on before it is completely dry. This is the worst mistake that you could make while it is still wet.
Jim Corkern is a writer and promoter of quality
Water Damage Miami and
water damage restoration in atlanta companies.
Mold and A Few Prevention Steps
Unfortunately for us, mold and its spores happen to be just about everywhere we are and there is not much that we can do to escape it, short of living in an environment where the air supply is strictly controlled. Not many people want to live out the rest of their lives in a laboratory or the most clean areas of a hospital.
Most people are aware of mold’s existence, but not many people know exactly what it is. Some people do not even realize that mold is a fungus just like mushrooms are, only that it can do us harm if left growing unchecked in large amounts. These fungi grow in almost any color that you can think of and even though some of them are fairly toxic and can cause you significant harm, most of them are harmless. Not only can they cause significant health problems, but they are also fairly unpleasant to look at and this is generally an important factor when you are selling a home that is contaminated with it.
Some molds are allergenic and they can cause not only aggravation of existing allergies or respiratory conditions, but they can also cause the onset of completely new allergies that did not exist prior to exposure.
Mold typically grows in homes that have moisture problems. This not only includes water seeping into the house at some point, but also having a high amount of humidity indoors. This can be controlled somewhat by putting the temperature in your home at about 65 degrees Fahrenheit.
You can help with the humidity in certain rooms of your home that are exposed to moisture every day such as the bathroom, laundry room, basement, and kitchen by installing exhaust fans in their ceilings. This will help remove the excess moisture and warm air from the room.
Another way to prevent mold is to clean up any water spills as soon as possible. Water damaged surfaces are common to have mold growing on them, since when something organic stays wet or in a humid environment for more than 48 hours, mold will start to grow on it. Try to keep water spills cleaned up and dry them as quickly as you can.
Mold also grows on wet items in the laundry room or the bathroom that have been forgotten about. Unfortunately, most people add to the problem simply by throwing dry clothing on top of them before they become moldy and making the problem worse.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
Most people are aware of mold’s existence, but not many people know exactly what it is. Some people do not even realize that mold is a fungus just like mushrooms are, only that it can do us harm if left growing unchecked in large amounts. These fungi grow in almost any color that you can think of and even though some of them are fairly toxic and can cause you significant harm, most of them are harmless. Not only can they cause significant health problems, but they are also fairly unpleasant to look at and this is generally an important factor when you are selling a home that is contaminated with it.
Some molds are allergenic and they can cause not only aggravation of existing allergies or respiratory conditions, but they can also cause the onset of completely new allergies that did not exist prior to exposure.
Mold typically grows in homes that have moisture problems. This not only includes water seeping into the house at some point, but also having a high amount of humidity indoors. This can be controlled somewhat by putting the temperature in your home at about 65 degrees Fahrenheit.
You can help with the humidity in certain rooms of your home that are exposed to moisture every day such as the bathroom, laundry room, basement, and kitchen by installing exhaust fans in their ceilings. This will help remove the excess moisture and warm air from the room.
Another way to prevent mold is to clean up any water spills as soon as possible. Water damaged surfaces are common to have mold growing on them, since when something organic stays wet or in a humid environment for more than 48 hours, mold will start to grow on it. Try to keep water spills cleaned up and dry them as quickly as you can.
Mold also grows on wet items in the laundry room or the bathroom that have been forgotten about. Unfortunately, most people add to the problem simply by throwing dry clothing on top of them before they become moldy and making the problem worse.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
Subscribe to:
Posts (Atom)
